1.3 10BASE-T LAN Communications
17
2
3
4
5
6
7
8
9
11
1
Connecting one PC to multiple Instrument's in a HUB.
Use a straight cable to connect the PC to the HUB and to connect
the instrument to the HUB.
When building a local network with no outside connections, it is
recommended that private IP addresses be used for the IP
addresses.
Make the same settings on the PC as those in Example 1. Set the
IP address manually.
Set the instrument as shown below, so that every instrument has a
unique host name and IP address.
The first instrument (The settings are made manually)
The second instrument (The settings are made manually)
The third instrument (The settings are made manually)
Common settings
Example 2
Host Name LOGGER1
IP Address 192.168.1.2
Host Name LOGGER2
IP Address 192.168.1.3
Host Name LOGGER3
IP Address 192.168.1.4
DHCP OFF
Subnet Mask 255.255.255.0
Gateway OFF
Port Number 880X
To Next Page
Loading...
