88
1.10 PPP (RS-232C + Modem) Settings on PC Side
5. Click the [Server Types] tab and set the [Type of Dial Up Server]
to [
PPP: Internet, Windows NT Server, Windows 98.]
Remove the checkmarks from all [Advanced options] boxes.
In the [
Allowed network protocols] boxes, only check the box for
[
TCP/IP], then click the [TCP/IP Settings.]
6. Select the [Server assigned IP address] and [Server assigned
name server address
] check boxes, then select the [Use default
gateway on remote network
] check box and click [OK.]
To Next Page
Loading...
