Hioki PW3336 - Introduction

Introduction
1
Thank you for purchasing the Hioki Model PW3336, PW3336-01, PW3336-02, PW3336-03, PW3337,
PW3337-01, PW3337-02, PW3337-03 Power Meter. To obtain maximum performance from the instrument
software, please read this manual first, and keep it handy for future reference.
The following documents are provided with this instrument. Refer to them as appropriate for your application.
The models are classified according to the number of the input channels and the factory-installed options as
follows.
The instrument can measure relatively high current with the use of HIOKI Clamp on Sensors (clamp sensors),
which are option, or current sensors. Hereafter, those sensors are collectively referred to as "current sen-
sors". Please read the instruction manuals of each sensor for details before using.
The current sensors are classified as either "TYPE1" or "TYPE2" according to the output specifications.
Using a TYPE2 current sensor requires Model 9555-10 Sensor Unit, which is option. Please refer to the
instruction manual of Model 9555-10 for details.
Introduction
1
Measurement
Guide
Offers an introduction to the instrument's basic measuring method for first time users.
2
Instruction Manual
(This document)
Contains explanation and instructions regarding the instrument's operating method and
functions.
Show the model that is equipped with each function as the icon.
 : Installed − : Not installed
Model Number of input channels
Factory-installed options
GP-IB D/A output
2 −−
2  −
2 − 
2 
3 −−
3  −
3 − 
3 