Hioki SM-8213 - Page 55

43
A DC measuring instrument like a HIOKI chart recorder whose input
impedance is greater than 10 MΩ can be connected to these terminals.
For permanent data recording, a HIOKI chart recorder is recommended
for better technical follow-up, including a supply of a variety of
recording charts and technical service.
3) output voltage
These tables show the relations between displayed value of super
megohmmeter and output voltage of RI-8000.
Target voltage 5V
Displayed value
0.025 0.05 0.25
Output voltage
10V 5V 1V
Ta
rget voltage 10V
Displayed value
0.05 0.1 0.5
Output voltage
10V 5V 1V
Ta
rget voltage 15V
Displayed value
0.075 0.15 0.75
Output voltage
10V 5V 1V
Ta
rget voltage 25V
Displayed value
0.125 0.25 1.25
Output voltage
10V 5V 1V
Ta
rget voltage 50V
Displayed value
0.25 0.5 2.5
Output voltage
10V 5V 1V
Targe
t voltage 100V
Displayed value
0.5 1 5
Output voltage
10V 5V 1V
Targe
t voltage 250V
Displayed value
1.25 2.5 12.5
Output voltage
10V 5V 1V
Targe
t voltage 500V
Displayed value
2.5 5 25
Output voltage
10V 5V 1V