Hirschmann GigaLION-24TP - Snmp-Server Contact; Snmp-Server Location

SNMP Commands
4-113
4
Example
snmp-server contact
This command sets the system contact string. Use the no form to remove the
system contact information.
Syntax
snmp-server contact string
no snmp-server contact
string - String that describes the system contact information.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp-server location (4-113)
snmp-server location
This command sets the system location string. Use the no form to remove the
location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#snmp-server community alpha rw
Console(config)#
Console(config)#snmp-server contact Paul
Console(config)#
Console(config)#snmp-server location WC-19
Console(config)#