Hirschmann GigaLION-24TP - Figure 3-6. IP Interface Configuration - Manual; Manual Configuration

Configuring the Switch
3-14
3
Manual Configuration
Web – Click System, IP Configuration. Select the VLAN through which the
management station is attached, set the IP Address Mode to “Static,” enter the IP
address, subnet mask and gateway, then click Apply.
Figure 3-6. IP Interface Configuration - Manual
CLI – Specify the management interface, IP address and default gateway.
Console#config
Console(config)#interface vlan 1 4-123
Console(config-if)#ip address 10.1.0.254 255.255.255.0 4-211
Console(config-if)#exit
Console(config)#ip default-gateway 192.168.1.254 4-213
Console(config)#