Hirschmann GigaLION-24TP - Page 43

Navigating the Web Browser Interface
3-5
3
802.1x Port authentication 3-43
Information Displays global configuration settings 3-44
Configuration Configures protocol parameters 3-45
Port Configuration Sets the authentication mode for individual ports 3-45
Statistics Displays protocol statistics for the selected port 3-48
ACL 3-52
Configuration Configures packet filtering based on IP or MAC addresses 3-52
Mask Configuration Controls the order in which ACL rules are checked 3-59
Port Binding Binds a port to the specified ACL 3-63
IP Filter Configures IP addresses that are allowed management access 3-50
Port 3-64
Port Information Displays port connection status 3-64
Trunk Information Displays trunk connection status 3-64
Port Configuration Configures port connection settings 3-67
Trunk Configuration Configures trunk connection settings 3-67
Trunk Membership Specifies ports to group into static trunks 3-70
LACP 3-71
Configuration Allows ports to dynamically join trunks 3-71
Aggregation Port Configures system priority, admin key, and port priority 3-73
Port Counters Information Displays statistics for LACP protocol messages 3-76
Port Internal Information Displays settings and operational state for local side 3-77
Port Neighbors Information Displays settings and operational state for remote side 3-79
Port Broadcast Control Sets the broadcast storm threshold for each port 3-80
Trunk Broadcast Control Sets the broadcast storm threshold for each trunk 3-80
Mirror Port Configuration Sets the source and target ports for mirroring 3-82
Rate Limit 3-83
Input Port Configuration Sets the input rate limit for each port 3-83
Input Trunk Configuration Sets the input rate limit for each trunk 3-83
Output Port Configuration Sets the output rate limit for each port 3-83
Output Trunk Configuration Sets the output rate limit for each trunk 3-83
Port Statistics Lists Ethernet and RMON port statistics 3-84
Table 3-2. Switch Main Menu
Menu Description Page