Hirschmann MACH1040

56
Installation MACH1040
Release 05 03/2021
7.5 Power consumption/power output
7.6 Scope of delivery
Device variants without PoE (MAR1040...,
MAR1140...)
Maximum
power consumption
Maximum
power output
Device (without SFP modules, without TP links) 10 W 34 Btu (IT)/h
additionally for each connected SFP module 1 W 3 Btu (IT)/h
additionally for each TP port with link 0.8 W 3 Btu (IT)/h
Device at full capacity (16 links) 26 W 88 Btu (IT)/h
Device variants with PoE (MAR1042...,
MAR1142...)
Maximum
power consumption
Maximum
power output
Device (without SFP modules, without TP links,
without PDs)
10 W 34 Btu (IT)/h
additionally for each connected SFP module 1 W 3 Btu (IT)/h
additionally for each TP port with link 0.8 W 3 Btu (IT)/h
additionally for each TP port with link when one
Class0-PD (powered device) is connected
19.5 W 12 Btu (IT)/h
Device at full capacity with 4 x Class0-PD (powered
device) connected
100 W 136 Btu (IT)/h
Amount Scope of delivery
1 × Safety and general information sheet
1 × Device
2 × Brackets with fastening screws (pre-mounted)
1× or2×
(depending on the
device variant)
3-pin terminal block for the supply voltage
1× or2×
(depending on the
device variant)
2-pin terminal block for signal contact
Table 16: Scope of delivery