Hirschmann MSP30

Installation MSP30/32/40/42 and MSM20/22/24/40/42/46/50
Release 12 06/2018
91
Note: Some products recommended as accessories do not support the
entire temperature range specified for the device and can thus restrict the
possible range of usage for the overall system.
Fast Ethernet SFP transceiver Order number
M-FAST SFP-TX/RJ45 942 098-001
M-FAST SFP-TX/RJ45 EEC 942 098-002
The following operating conditions apply to twisted pair transceivers:
 Usable with:
- HiOS as of software version 03.0.00
- for PRP ports on RSP devices, as of software version 02.0.01
- for PRP ports on EES devices, as of software version 02.0.02
- Classic switch software as of software version 08.0.00
- HiSecOS as of software version 01.2.00
 Longer RSTP switching times and link loss detection times compared to twisted pair ports
provided by the device directly.
 Not applicable for combo ports.
 Not applicable for ports which support only Gigabit Ethernet.
 To set autocrossing manually is currently not possible.
M-FAST SFP-MM/LC 943 865-001
M-FAST SFP-MM/LC EEC 943 945-001
M-FAST SFP-SM/LC 943 866-001
M-FAST SFP-SM/LC EEC 943 946-001
M-FAST SFP-SM+/LC 943 867-001
M-FAST SFP-SM+/LC EEC 943 947-001
M-FAST SFP-LH/LC 943 868-001
M-FAST SFP-LH/LC EEC 943 948-001
SFP-FAST-MM/LC
a
a. You find further information on certifications on the Internet at the Hirschmann product
pages (www.hirschmann.com).
942 194-001
SFP-FAST-MM/LC EEC
a
942 194-002
SFP-FAST-SM/LC
a
942 195-001
SFP-FAST-SM/LC EEC
a
942 195-002