Turn on the start switch on the left handlebar, the battery
can supply power for the CDI. Then the CDI supply power for the
startor relay, then the power from the battery can be sent to
the startor motor through the startor relay and the startor
motor works help the engine to work.
Note:
1. When electrical starting, please keep the battery with
enough power and the time of pressing button will be within
55 seconds. If longer time more than 5 seconds, it may cause
the damange of startor relay and the startor relay motor
and may also cause the damage of the battery that it can
not be charged or not charge enough.
2. When starting, if heard some noises from the startor
relay, the battery must be without enough power. Please
stop starting and change a powerful battery or charge for
it.
3. If the startor motor can not work normally, please check
according to the 2 rule to see if it is not lubricated enough
To Next Page
Loading...
