Hisun 700UTV - Cooling System of Engine

98
on the frame after instead.(Attention,the bolts
must be the special self-lock nut, the fastening
torque must be 45-55N.m)
4.7.Cooling System of Engine
4.7.1 Disassembly, Inspection and Assembly of Water Cool System
4.7.1.1 Disassemble the Water Cool System
4、 1. Disassemble the bumper and front
faceplate(Attached Figure4-5-1)
Attached Figure4-5-1
1. Bumper
2. Front faceplate
2. Take down the water tank bracket combination and
slanting support combination.(Attached
Figure4-5-2)