4.6.4Inspection and Maintenance of Rear Suspension
1、 It is similar to the front suspension
Check if there exists any distortion or crack on the
install axis of the shock absorbe in which case it must
be replaced.
2、 nspect the rocker bushing and the middle rubber separate
is integrant.( According to the front Suspension)
3、 The cotter pin on the head of the install axis which in
the rear shock absorbe whether is credible.
Attention,
After disassemble the rear shock absorbe,check if
there exists any distortion or crack on the frame
connection hole and the rear shock absorbe,if
so,inform the special serviceman to inspect and
service first or install the rear shock absorbe
To Next Page
Loading...
