3 、 Disassembe the left and right transmission
shaft ,cleaning and assemble it again.
Attention,
1、The dustproof rubber wrap on the ball cage is not
allow to contact with the gas and diesel oil.
2 、 The dustproof rubber wrap does not allow to be
scratched,a slight scratches can damage the
dustproof rubber wrap very quickly.
3、When reassembles the left and right transmission
shaft, in the ball cage must sufficiently
enter 2/3 volume with the Lithium lubricating.
4、Open the differential device and inspect the damage
of the gears,axes adn gasket,instead those parts
according to the checke.
4.4.2.3 Assemble the front bridge parts
1、Put the left and right transmission shaft in the front
bridge differential device. (Attached Figure4-4-1)
2、Poursin 0.32L SAE 80 API GL-4 the high quality gear
grease into the front bridge differential device and
screws tight the oil filler bolt
To Next Page
Loading...
