Hisun HS 1000UTV - Checking the brake pedal; Selecting the Correct Gear

Operating the Vehicle
8-3
and other will stay on.
 Be sure to return switch to center position
after turning.
① Head light ②Front turn signal lamp;
3.Checking the brake pedal.
■Brake Pedal
CAUTION:
To avoid personal injury:
 If the operator suddenly brakes, an
accident may occur due to loss of
control or the shifting forward of heavy
loads.
 When driving on icy, wet or loose
surface, make sure the vehicle is
correctly loaded to avoid skidding or
loss of steering control. Reduce the
speed.
The brake pedal is the left pedal on the foot
board. Depress the pedal to slow or stop the
vehicle.
① Brake pedal
4.Selecting the Correct Gear.
■Gear ShiftLever
CAUTION:
To avoid personal injury:
 Avoid changing range gear shift lever
when ascending or descending a slope.
 Before ascending or descending a slope,
shift to the “L” range to control the
vehicle speed.
 Operate in reverse at slow speeds to
maintain control.
1. The gear shift lever can only be shifted
when the vehicle is completely stopped and
the brake pedal is pressed.
2. To avoid transmission and shift linkage
damage, completely stop the vehicle using
the brake pedal before shifting gears.
3. Select proper gear depending on the type of
job.
4. Before exiting the vehicle, shift the gear shift
lever to the “NEUTRAL” position and set
parking brake.