Periodic Service
10-2
CAUTION:
To install the seat, Adjust the four bolts M8evenly
to ensure the seat moves forward and backward
normally. Improper installation can result in seat
rail being blocked and the inability to move the seat
back and forth.
WARNING
POTENTIAL HAZARD
Aloose seat.
WHAT CAN HAPPEN
The operator could lose control or the operator
or passenger could fall if the seat is loose
during operation.
HOW TO AVOID THE HAZARD
Make sure the seat is mounted firmly.
Moving the Seat Forward and Backward.
The seat can be moved forward and backward to
fit the height of different drivers. Pull the handle up
and move the seat forward and backward.
1. Seat handle
Adjustment of The Steering Wheel：
You can adjust the height of the steering wheel
according to the driver’s height and driving
habits。
1. Move steering wheel adjustment lever to
“vertical or upper” direction and hold.
2. Adjust the steering wheel up or down to
The proper position.
3. Tighten the adjustment lever to secure the
steering wheel in the desired position.
Cargo Bed
1. Cargo bed
WARNING
POTENTIAL HAZARD
Overloading the cargo bed.
WHAT CAN HAPPEN
Could cause changes in vehicle handling
which could lead to an accident.
HOW TO AVOID THE HAZARD
Never exceed the stated maximum load
limit for this cargo bed.
Cargo should be properly distributed and
securely attached.
Reduce speed when carrying cargo. Allow
greater distance for braking.
To Next Page
