Hisun HS 1000UTV - Checking wheel bolt torque

Periodic Service
10-10
① Range gear shift lever
①Accelerator pedal ② Free Travel
■Checking wheel bolt torque
CAUTION
To avoid personal injury
 Never operate vehicle with a loose Lug
nuts.
 Every time the Lug nuts are loosened they
should be retightened to the specified
torque.
 Check all Lug Nuts frequently and keep
them tight.
Check Lug nuts regularly especially when new. If
they are loose tighten them as follows:
Torque Lug Nuts to 75to 90 N.m
■Cleaning air cleaner primary element
1. Remove the air cleaner cover and primary
element. Clean the primary elements.
When dry dust adheres to the element blow
compressed air from the inside turning the
element. Pressure from compressed air must
be under 205kpa.
When carbon or oil adheres to the element
soak the element in detergent for 15 minutes
then wash it several times in water rinse with
clean water and dry it naturally. After element
is fully dried inspect inside of the element with
a light and check for damage. Replace the
primary element once yearly or after every
sixth cleaning,
whichever comes first.