APCQ CAPACITOR BANKS
© 2022 Hitachi Energy. All rights reserved
Figure 1: APCQ-M and APCQ-R transportation
Figure 2: Lifting lugs
3.2. Identification tag
The APCQ capacitor bank nameplate is located on the front door, at the outside. A second similar nameplate is pre-
sent inside the cubicle.
The nameplate information should always remain readable to ensure proper identification during the whole life of the
APCQ capacitor bank. The bank nameplate includes key data like the type, the nominal voltage and frequency as well
as an HITACHI ENERGY internal article code and data as per international regulations.
3.3. Storage
The APCQ capacitor bank must be stored indoors, in a dry, dust free, non-corrosive atmosphere and protected from
vibrations or shocks.
The storage temperature must be between -20°C (or -4°F) and +60°C (or +140°F).
To Next Page
Loading...
