• Place the cursor at an item where an LPAR line crosses a VNIC number
column, and press F8: Packet Filter to display the sub-screen. Select an
inter-LPAR packet filtering to change, and press the Enter key.
Table 7-22 Details of Inter-Packet Filtering
Inter-LPAR
packet
filtering
Inter-LPAR packets
Packets to
outside LPAR
manager
Purpose
Inside
LPAR
manager
Outside
LPAR
manager
Disable Transmit Not
Transmit
Transmit Permits inter-LPAR
communication in the same
segment.
Used for inter-LPAR
communication only inside
LPAR manager.
Enable Not
Transmit
Transmit Transmit Disables inter-LPAR
communication in the same
segment.
Used for improving
independence and security of
LPARs when each LPAR has a
respective owner.
Disable (ALL) Transmit Transmit Transmit Permits Inter-LPAR
communication in the same
segment.
Used for inter-LPAR
communication using network
redundancy configuration such
as Intel(R) PROSet connection
monitoring with Windows and
bonding with Linux.
7-54
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
