Figure 7-34 Date and Time screen when using NTP server
The following table describes each item on this screen.
Table 7-30 Items on the Date and Time screen and their descriptions
No. Item Description
Default
Value
Supported
LPAR
manager
Version
(1) Select
Display
Select displaying time.
LPAR RTC: Displays the current RTC time of
the LPAR.
LPAR SEL Time: Displays the logical SEL
time of the LPAR.
Last Activated: Displays the RTC time when
the LPAR is activated last.
Last Deactivated: Displays the RTC time
when the LPAR is deactivated last.
RTC Last Modified: Displays the RTC time
of the LPAR updated last by the guest.
LPAR RTC 01-0X~
(2) # Displays the LPAR numbers. - 01-0X~
(3) Name Displays the LPAR name. NO_NAME 01-0X~
(4) Sta Displays the LPAR status.
Act (Activate): The LPAR is powered on.
Dea (Deactivate): The LPAR is powered off.
Fai (Failure): The LPAR cannot be used due
to an unrecoverable failure. Reboot LPAR
manager when this happens. If rebooting
LPAR manager cannot solve the problem,
Dea 01-0X~
Operation by LPAR manager Screen
7-83
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
