• Synchronizes the system time
• Boot the LPAR manager and connect to the LPAR manager screen
• Place the cursor on LPAR RTC on the Date and Time screen and press
Enter to display a sub-screen. Select LPAR SEL Time and press Enter.
Figure 7-37 Date and Time sub-screen
• Place the cursor on Time Zone on the Date and Time screen and press
Enter to display a sub-screen. Set a "Time Zone" and press Enter.
Figure 7-38 Data and Time Screen
• Place the cursor on LPAR SEL Time on the Date and Time screen and
press Enter to display a sub-screen. Select a "LPAR RTC" and press
Enter.
7-92
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
