Figure 7-39 Data and Time sub-screen
• Place the cursor on F7: Change System Time Zone on the Date and Time
screen and press Enter to display a sub-screen. Set a "Time Zone" and
press Enter.
Figure 7-40 Data and Time sub-screen
• Adjust the time of LPAR using Adjust LPAR Time on the Date and Time
screen.
Figure 7-41 Data and Time sub-screen
• Save the configuration using F9: Save Configuration on the LPAR
manager Menu screen.
Figure 7-42 the LPAR manager Menu Screen
Operation by LPAR manager Screen
7-93
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
