Figure 7-43 Setting of the Import Config
• Save the configuration using F9: Save Configuration on the LPAR
manager Menu screen.
Figure 7-44 the LPAR manager Menu Screen
How to use NTP on LPAR manager
Case1: Time synchronization with a management module. [recommended]
• Shut down all OSs.
• On the Date and Time screen, place the cursor on LPAR RTC and press
Enter to open the sub-screen. Select LPAR SEL Time and press Enter.
Figure 7-45 Setting of the NTP Config
• Place the cursor on Time Zone on the Date and Time screen and press
Enter to display a sub-screen. Set a "Time Zone" and press Enter.
Operation by LPAR manager Screen
7-95
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
