Figure 7-53 Adjusting Time of LPAR
• Save the configuration using F9: Save Configuration on the LPAR
manager Menu screen.
Figure 7-54 Saving of the Configuration Information
Case2: When performing Synchronization by NTP Server that is set Server 1
to 2.
• Time adjustment with the NTP server set to NTP Server 1 or NTP Server 2
Shut down All guest OSs.
• Place the cursor on LPAR RTC on the Date and Time screen and press
Enter to display a sub-screen. Select "LPAR SEL Time" and press Enter.
Figure 7-55 Selecting the LPAR SELTime
• Place the cursor on Time Zone on the Date and Time screen and press
Enter to display a sub-screen. Set a "Time Zone" and press Enter.
7-98
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
