Message Content All LPARs are already defined.
What to do Review the process.
Message Content Auto activation for LPARx results in error.
Explanation Auto activation for LPARx failed.
LPAR manager
operation
Aborts the specified process.
What to do Follow the instructions in subsequent messages.
Message Content Can not change LP System Time due to NTP enabled.
Explanation LPAR manager system time cannot be changed due to NTP
enabled.
LPAR manager
operation
Aborts the specified process.
What to do Deactivate the NTP, Change the LPAR manager system time.
Message Content
Can not change timezone of LP System Time due to NTP
enabled.
Explanation LPAR manager System time zone cannot changed due to NTP
enabled
LPAR manager
operation
Aborts the specified process.
What to do Deactivate the NTP, Change the LPAR manager system time zone.
Message Content Cannot remove the last user.
Explanation You cannot remove the last user.
LPAR manager
operation
Aborts the specified process.
What to do Review the specified process.
Message Content Change LP IP Address
Explanation The LP IP Address needs to be changed (to something other than
0).
LPAR manager
operation
Waits for the LP IP Address to be changed.
What to do Change the LP IP Address.
Message Content Change VNIC System No
Explanation The virtual NIC System Number needs to be changed (to
something other than 0).
Messages
9-11
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
