Message Content Change VNIC System No
LPAR manager
operation
Waits for the virtual NIC System Number to be changed.
What to do Change the virtual NIC System Number.
Message Content Count Over Shared NIC Config.
Explanation The scheduling mode cannot be changed to shared mode, due to
exceeding the upper limit of shared NIC.
LPAR manager
operation
Aborts the specified process.
What to do Reconsider the specified process.
Message Content Device Assign error.
Explanation LPAR activation fails.
Or device connection/disconnection fails.
LPAR manager
operation
If activating the LPAR, stops activation. If changing the device
target, stops connecting or disconnecting the device.
What to do Deactivate the relevant LPAR, reassign the device that has been
assigned to the LPAR, and then reactivate the LPAR.
Or check that a device that not supported in dedicated mode is
assigned.
Message Content Device Schedule Mode is not Exclusive Shared.
Explanation The schedule mode of the target PCI device is not exclusively
shared.
LPAR manager
operation
Aborts the specified process.
What to do Select a PCI device with the exclusively shared mode (Schd:E).
Message Content Error Character
Explanation An error in the characters you typed caused the setting process to
fail.
LPAR manager
operation
Aborts character setting.
What to do Revise the entry restrictions.
Message Content Failed to save LP configuration
Explanation The process of saving the configuration failed.
LPAR manager
operation
Aborts the specified process.
9-12
Messages
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
