Message Content Password mismatch.
Explanation The password you entered did not match.
LPAR manager
operation
Aborts the specified process.
What to do Try setting the password again.
Message Content
Port number for virtual console is out of range for specified
connection mode.
Explanation The specified port number is outside the range of values that can
be used for the current connection mode for the virtual COM
console.
LPAR manager
operation
Aborts the specified process.
What to do Check the connection mode and port number for the virtual COM
console, and then retry the process.
Message Content Press any key first. Then press F10 key next.
Explanation To make the changed setting effective, you need to press F10.
LPAR manager
operation
Waits for the F10 key to be pressed.
What to do Press any key, wait for the output message to disappear, and
then press the F10 key.
Message Content Resource lock failure.
Explanation Locking resources failed when you updated configuration
information.
Locking resources failed when you performed a system or LPAR
operation.
Locking resources failed when you updated the RAR of a NIC.
LPAR manager
operation
Aborts the specified process.
What to do Retry the specified process.
Message Content Sampling time Error
Explanation Sampling time setting failed in LPAR Usage screen.
LPAR manager
operation
Aborts the sampling time setting.
What to do Set a number between 1 and 60.
Messages
9-21
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
