Message Content The name is used for other group.
LPAR manager
operation
Aborts change in the group name.
What to do Give another name to the group.
Message Content The name is used for other LPAR.
Explanation An LPAR with the name you set already exists.
LPAR manager
operation
Aborts LPAR name change process.
What to do Change the name.
Message Content
The specified LPAR has corrupted in an LPAR Migration,
please try to recover the LPAR.
Explanation Since the LPAR has failed due to LPAR migration, it cannot be
operated.
LPAR manager
operation
Not allows operation due to the failed LPAR in LPAR migration.
What to do Recover the LPAR for LPAR migration.
Message Content
The VF is already assigned the maximum assignable times
to LPARs.
Explanation Device connection/disconnection fails.
LPAR manager
operation
Stops LPAR activation.
Or stops device connection/disconnection.
What to do Assign the device that is assigned the LPAR again, and perform
LPAR activation again.
Message Content There is no permission to execute the operation.
Explanation The management module user does not have the access
permissions required to execute this processing.
LPAR manager
operation
Cancels the specified process.
What to do Assign a role with access permissions for this processing, to the
management module user.
Message Content
This request has been cancelled.
The logical processor topology setting mode for the guest
NUMA is set to the Physical NUMA Node Binding Mode.
Explanation For LPARs for which physical NUMA node binding is set, physical
processors cannot be allocated to logical processors.
Messages
9-25
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
Need help?
General