Hitachi CB 520H A1 User Manual

Message Content LP detected unsupported settings in the configuration.
What to do Check the detailed message in the LP system log, and then check
values specified in the configuration information.
Message Content LP dump generation failed.
Explanation The LPAR manager dump failed to be obtained.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message Content LP dump is lost.
Explanation The LPAR manager dump was lost.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message Content LP dump management file access error occurred.
Explanation File access error of LPAR manager dump management occurred.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message Content LP dump transfer failed.
Explanation Transfer of the LPAR manager dump to the management module
failed.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message Content LP failed deletion of the initial parameter file.
Explanation Deleting the initial parameter file failed.
What to do If this LP System Logs is often collected, contact your reseller or
consult maintenance personnel.
Message Content LP failed in network time synchronization by NTP.
Explanation Synchronization the LPAR manager system time by NTP failed.
What to do Check the followings.
Whether specified IP Address is correct.
Whether NTP Server is operating.
Whether LAN route is connecting to NTP Server.
Messages
9-41
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide

Hitachi CB 520H A1 Specifications

General

Brand	Hitachi
Model	CB 520H A1
Category	Server
Language	English