Message Content LP logged the EFI-Driver log for Shared FC.
Explanation The shared FC driver transferred the log to LPAR manager.
What to do None.
Message Content LP recovered from NTP error status.
Explanation The NTP time synchronous error status of LPAR manager system
time recovered.
What to do None.
Message Content LP restarted a LPAR on the destination blade.
Explanation Performed concurrent maintenance and LP restarted a LPAR on
the destination blade.
What to do None.
Message Content LP restarted a LPAR on the source blade.
Explanation Performed concurrent maintenance and LP restarted a LPAR on
the source blade.
What to do None.
Message Content LP saved configuration.
Explanation Saved the configuration information
What to do None.
Message Content LP Shutdown State Changed to In Progress.
Explanation The shutdown status has changed to In Progress.
What to do None.
Message Content LP Shutdown State Changed to Ready.
Explanation The shutdown status has changed to Ready.
What to do None.
Message Content LP skipped LPAR auto activation process.
Explanation "Activate" LPAR was skipped with the auto activate operation.
What to do None.
Message Content LP started in safe mode.
Explanation LPAR manager started in safe mode. The following operations are
suppressed in safe mode:
Messages
9-53
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
