ID Message
Operation for which an audit log is
collected
01003097
"Failed to enable or disable the USB
Auto Attach settings to the LPAR.
LPARxxx Slot#:xxx PCI#:xxx Value:xxx"
When the LPAR manager screen is used to
request change of USB Auto Attach
functionality for an LPAR and the request fails
01003098
"Assigned the network segment of the
VNIC to the LPAR. LPARxxx VNIC#:xxx
Value:xxx"
When HvmSh and so on is used to request
change of a network segment to be assigned
to a logical NIC port and the request
immediately succeeds
0100309A
"Assigned the network segment of the
VNIC to the LPAR. LPARxxx VNIC#:xxx
Value:xxx"
When the LPAR manager screen is used to
request change of a network segment to be
assigned to a logical NIC port and the request
succeeds
0100309B
"Failed to assign the network segment
of the VNIC to the LPAR. LPARxxx
VNIC#:xxx Value:xxx"
When the LPAR manager screen is used to
request change of a network segment to be
assigned to a logical NIC port and the request
fails
0100309C
"Set the MAC address of the VNIC for
the LPAR. LPARxxx VNIC#:xxx Value:xxx"
When HvmSh and so on is used to request
change of a MAC address to be assigned to a
logical NIC port and the request immediately
succeeds
0100309E
"Set the MAC address of the VNIC for
the LPAR. LPARxxx VNIC#:xxx Value:xxx"
When the LPAR manager screen is used to
request change of a MAC address to be
assigned to a logical NIC port and the request
succeeds
0100309F
"Failed to set the MAC address of the
VNIC for the LPAR. LPARxxx VNIC#:xxx
Value:xxx"
When the LPAR manager screen is used to
request change of a MAC address to be
assigned to a logical NIC port and the request
fails
010030A0
"Set the VLAN configuration of the
VNIC for the LPAR. LPARxxx VNIC#:xxx
Value:Undef"
When HvmSh and so on is used to request
change of VLAN mode of a logical NIC port to
Undef and the request immediately succeeds
010030A2
"Set the VLAN configuration of the
VNIC for the LPAR. LPARxxx VNIC#:xxx
Value:Undef"
When the LPAR manager screen is used to
request change of VLAN mode of a logical
NIC port to Undef and the request succeeds
010030A3
"Failed to set the VLAN configuration
of the VNIC for the LPAR. LPARxxx
VNIC#:xxx Value:Undef"
When the LPAR manager screen is used to
request change of VLAN mode of a logical
NIC port to Undef and the request fails
010030A4
"Set the VLAN configuration of the
VNIC for the LPAR. LPARxxx VNIC#:xxx
Value:Untagged(xxx)"
When HvmSh and so on is used to request
change of VLAN mode of a logical NIC port to
Untag and the request immediately succeeds
010030A6
"Set the VLAN configuration of the
VNIC for the LPAR. LPARxxx VNIC#:xxx
Value:Untagged(xxx)"
When the LPAR manager screen is used to
request change of VLAN mode of a logical
NIC port to Untag and the request succeeds
010030A7
"Failed to set the VLAN configuration
of the VNIC for the LPAR. LPARxxx
VNIC#:xxx Value:Untagged(xxx)"
When the LPAR manager screen is used to
request change of VLAN mode of a logical
NIC port to Untag and the request fails
9-68
Messages
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
