Switch function Target Port Settings
Port17 Connect to physical cables.
With the Onboard NIC, no cable is
required.
Port Speed Port1 - Port16 Auto Negotiation (This setting cannot
be changed.)
- 10GBASE-KR
- 1000BASE-KX
Port17 Auto Negotiation (This setting cannot
be changed.)
- 10GBASE-KR
- 1000BASE-KX
VLAN Port1 - Port16 [VLAN mode]
- Undef (not supported)
- Tagged (default)
- Untagged
1
Only 1 VLAN mode can be set per
LPAR.
[VLAN ID]
- Tagged: Assign all (ID).
- Untagged: Only one (1) VLAN ID out
of the range from 1 to 4094
Port17 Tagged All (This setting cannot be
changed).
Configured to transmit all packets.
Port mirroring Port1 - Port17 - If promiscuous mode is "Restricted"
(default):
Receives only the packets to the
target LPARs (MAC addresses).
- Through
Not supported
Jumbo frame function Port1 - Port17 Always enabled.
Maximum value: 9000 bytes
Uplink failover Port1 - Port17 Always enabled.
If Port 17 is linked down, all the other
ports from Port 1 to Port 16 are also
linked down.
Flow control Port1 - Port16 Always disabled.
Port17 Always enabled.
IGMP Snooping Port1 - Port17 Always disabled.
Spanning tree Port1 - Port17 Always disabled.
Notes:
LPAR manager Functions
1-53
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
