3. Remove any accessible boxes containing additional S10 Node
components from inside the carton.
4. Lift the sides off the bottom of the carton.
Set the clips and the parts of the carton aside so that the carton can be
reassembled.
5. Remove any foam packing pieces from the top of the enclosure.
Keep all foam packing pieces with the enclosure carton. You will need
them for repacking the enclosure.
6. If the S10 Node includes the upgrade kit, slide the two straps off the top
of the enclosure. You do not need to completely remove the straps.
Chapter 3: Refurbishing an HCP S10 Node
25
HCP S Series Node Refurbishment
Step 1 (conditional): Unpack the enclosure
To Next Page
Loading...
Need help?
General