After removing the PDU, you have access to the caged nuts in the four
holes from which you removed the screws.
2. Using the caged nut tool, remove the four caged nuts from the rack.
3. On each side of the PDU, using the #2 Phillips screwdriver, unscrew and
remove the silver screws that attach the side bracket to the PDU.
4. Pack the PDU, side brackets, and screws in the PDU box, with the screws
in their original packaging or in bags that you supply.
56
Chapter 3: Refurbishing an HCP S10 Node
HCP S Series Node Refurbishment
Step 22 (conditional): Unrack and pack the PDUs
To Next Page
Loading...
