11
Projector parts and functions
Projector parts and functions
Front view
Lens
Infrared receiver
Adjustable foot
Adjust the height and angle of the
projector with the adjustable foot
Ventilation inlet
The internal cooling fan draws cool
air from the ventilation inlet into the
projector.
Ventilation slot
The hot air generated
inside the projector is
dispersed through the
ventilation slot. Make
sure the ventilation slot is
free from obstruction.
Rear view
LED
STATUS
ENTER
INPUT
ERROR
MENU
ON
STANDBY
INPUT
Used to toggle between different input
signal source
Refer to “ Page 10 : Input Selection “. for
more details
MENU
Displays or hides the OSD adjustment
screen
(Standby)
Use this button to start up or shut down the
projector
.
STANDBY (LED)
The indicator that shows the projector's
standby status
.
Voltage Selector
(Default at 110V)
Refer to " Page 58 : LED STATUS ".
for the detail display information.
ERROR (LED)
Displays the cause of problem (i.e.
temperature, fan, lamp or system) that
h a s l e d t o p r o j e c t o r m a l f u n c t i o n .
buttons
or adjust items on the OSD or toggle
between different images.
POWER ON LED
Displays the projector's power status
ENTER
OSD item; you can choose from "Select
Adjustable foot
Adjustable foot
Infrared sensor
Power inlet
Projector Keypad
Power switch
To Next Page
Loading...
