Hitachi CP-WU13K - Pip Select; Pip Position

41
OSD Menu description
Main Select
When you want to project PIP image, use this function to
specify the image source for the PIP image. This function is
identical to Input Selection; for more information.
PIP Select
Use this function to select the source for the sub window.
You can choose from HDMI1, HDMI2, RGB D-15, YUV1
RGBHV/YUV2 and SDI/HDSDI/3G.
PIP Position
You can choose to display
the sub window in

picture according to your preference.
PIP

see two windows on the projected image; the larger one is the primary image and the smaller one is
the sub image. By choosing "OFF", the PIP function will be disabled and you will only see a single
image window.
*please refer to the following main and PIP source matrix for a valid main and PIP source selection
when PIP is ON.*
Main select
Source availabe - source not availabe
PiP select
HDMI1
HDMI2
RGB(D15)
YUV1
RGBHV/YUV2
SDI/HDSDI/3G
HDMI1
-
-
HDMI2
-
-
RGBHV/
YUV2
-
-
SDI/
HDSDI/3G
-
-
RGB
(D15)
-
--
YUV1
-
Pip/main source
availability
Sub picture
Main picture
Split L-R
Bottom RightBottom Left
Top RightTop L ef t