40
OSD Menu description
LAYOUT
Zoom
Due to the fact that some consumers may still be using older television systems, some TV programs
may not display the edges of the image. Use this function to hide the image edge by choosing one of
the following three options:
Off
Setting it to off makes no change to the projected image.
Crop
Setting it to "Crop" will add two "masks" equivalent to 3% of horizontal resolution on either side of
the image and two similar masks above and below the projected image.
Zoom
You can use this function to enlarge the image's horizontal resolution over the 106% of the default
aspect ratio. Any portion that exceeds the original image will be cropped.
When you set aspect ratio to " Native" or "Unscaled" , be sure to set Zoom to "Off" or "Crop".
16:10
Off Crop Zoom
5:4
2.35
To Next Page
Loading...
