28
Item Description
WIRED
SETUP
Configures wired
network.
Setting values are saved
after selecting APPLY.
DHCP
Configures whether IP address is automatically
obtained or not.
Use the ▲/▼ buttons to turn DHCP on/off.
ON
OFF
IP
ADDRESS
Configures the IP address when DHCP is disabled.
Enter the IP ADDRESS.
This function can only be used when DHCP is set
to OFF.
SUBNET
MASK
Configures the subnet mask when DHCP is disabled.
Enter the SUBNET MASK.
This function can only be used when DHCP is set
to OFF.
(continued on next page)
2. Connection to the network
Setting values are not saved if Menu disappears before selecting
APPLY.
NOTE
To Next Page
Loading...
