–
44
–
EN
2C15
1
Press the SETUP Button in STOP mode.
¡The setup screen will appear.
2 Press the Arrow Buttons (K/L) to select
DISPLAY and then press the ENTER Button.
3 Press the Arrow Buttons (K/L) to select an
item, and then press the ENTER Button.
TV ASPECT
(Default : 4:3 LETTER BOX)
4:3 L-BOX: Wide screen
with black bars on top and
bottom
4:3 PAN-SCAN : Full
height picture, trimmed both
sides
16:9 WIDE : If wide screen
TV is connected
DVD
DISPLAY SETTINGS
FRONT DISPLAY (Default
: BRIGHT)
Adjust the brightness of the
display of the unit.
AUTO DIM: Stays dim only
during playback.
ANGLE MARK (Default :
ON)
Display or not display the
Angle icon on the screen.
AUTO POWER OFF
(Default : ON)
Set or not set to turn off
after the screen saver is
started and no keys are
pressed for 30 minutes.
4
Press the Arrow Buttons (
K/L
) to select a
desired item, and then press the ENTER
Button.
5 Press the SETUP Button.
¡The setup mode will be cancelled and the ordinary
screen will appear.
Notes
¡Be sure to press the SETUP Button, or the setting
will not work.
¡You can also choose the item by pressing the
Number Buttons.
¡While the setup menu is shown you can not open or
close the tray.