FRU replacement
If the SVP must be replaced, users back up the configur
ation and then return
the failed SVP to HDS. When users receive the new SVP, they restore the
configuration using the backup from the failed SVP.
The procedures for backing up and restoring the SVP configuration are in the
Hitachi VSP Hardware Reference Guide.
Operating system recovery
R
ecovery of the SVP operating system is achieved using Operating System
Recovery Tool (OSRT).
The SVP supports OSRT as a backup solution for the C: partition. With this
tool, users or CEs can back up the C: partition and restore it at any time,
without requiring a USB. This tool can recover the SVP from OS or data
corruption on the C:\ partition.
SVP support 41
Hitachi Virtual Storage Platform G200, G400, G600 Service Processor Technical Reference
To Next Page
Loading...
