5. Assign the IP address 192.168.0.15 to the network bridge.
Powering off the SVP
Procedure
1. From a management console PC, connect to the SVP using Windows
R
emote Desktop Connection.
2. On the SVP, click Start in Windows desktop.
3. From the displayed menu, click Windows Security.
4. In the Windows Security window, click the option in the power (up
arrow) menu.
5. From the displayed menu, click Shut down.
The SVP power and POWER LED go off.
SVP support 43
Hitachi Virtual Storage Platform G200, G400, G600 Service Processor Technical Reference
To Next Page
Loading...
