• Some switch vendors require F port connectivity (for example, McData
ED5000).
As shown in the following table, fabric settings, topology settings, and
available link speed depend on the settings of the packages and protocols
used for the storage system connections, as well as whether host mode
option 51 is used.
Note: If you connect storage systems using iSCSI, host mode option settings
become invalid.
Package
name
Protocol
Host mode
option 51
Fab
Initiator
port and
RCU target
port
topology
Available
link speed
4HF8 8GbpsFC OFF ON Point-to-Point • 2 Gbps
• 4 Gbps
• 8 Gbps
ON ON Point-to-Point • 2 Gbps
• 4 Gbps
• 8 Gbps
2HF16 16GbpsFC OFF ON Point-to-Point • 4 Gbps
• 8 Gbps
• 16 Gbps
ON ON Point-to-Point • 4 Gbps
• 8 Gbps
• 16 Gbps
2HS10S 10 Gbps
iSCSI
N/A N/A N/A 10 Gbps
2HS10B 10 Gbps
iSCSI (10G
BASE-T)
N/A N/A N/A • 10 Gbps
• 1 Gbps
Planning for TrueCopy
3-31
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models
To Next Page
Loading...
