Item Description
• Mixed: Both Fibre and iSCSI exist within remote
connection.
Status Remote connection status.
• Normal: All remote path within remote connection are
fine.
• Failed: All remote path within remote connection has
problem.
• Warning: Some remote path within remote connection
has problem.
Minimum Number of Paths • TC/GAD: The minimum number of TC and GAD paths.
• UR: The minimum number of UR paths.
RIO MIH Time The specified RIO MIH time in seconds.
Roundtrip Time The specified roundtrip time in milliseconds.
Registered Time Date and time the connection was established.
Last Update Date Date and time of the last update.
Number of Remote Paths Number of paths specified in the remote connection.
Remote Paths table
Item Description
Local Information about the local storage system port.
• Port ID: Displays the port identifier.
• Port Type: Displays the port type.
¢
Fibre
¢
iSCSI
Remote Information about the remote storage system port.
• Port ID: Displays the port identifier.
• IP Address: Displays the IP address of the port when
Port Type is iSCSI.
• TCP Port Number: Displays the TCP port number when
Port Type is iSCSI.
Status Remote path status.
Remove Remote Connections window
Use this window to remove remote connections.
For complete information and instructions, see
Deleting TrueCopy remote
connections on page 7-18.
B-26
TC GUI reference
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models
To Next Page
Loading...
