Configuring additional remote paths
You can configure additional remote paths as needed. A maximum of eight
remote paths are supported.
Prerequisite information
• Review the path-related prerequisites in
Adding remote connections on
page 5-2.
Procedure
1. Open the Remote Connections window.
In Hitachi Command Suite:
a. On the Resources tab, expand the Storage Systems tree.
b. Right-click the target storage system, and click Remote
Connections.
In Device Manager - Storage Navigator:
a. Click Storage Systems, and then expand the Storage Systems
tree.
b. In the Storage Systems tree, click Replication > Remote
Connections.
2. In the Remote Connections window, click the Connections (To) tab.
3. In the Connections (To) tab, select the remote connection where the
remote path is to be added.
7-14
Monitoring and maintaining the TC system
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models
To Next Page
Loading...
