Hitachi G200 - Pair Operation Commands and Options; Monitoring Commands and Options

Pair operation commands and options
The following table shows the commands and options for performing TC pair
operations.
Operation Option
Available in
HDvM - SN
CCI
command and options
Create Pairs Copy Type Yes paircreate
none
LU Selection Yes paircreate
none
CTG ID Yes paircreate
-f[g] fence [CTG ID]
Initial Copy Type Yes paircreate
[-nocopy | -nocsus]
Initial Copy Priority Yes paircreate
none
Split Pairs Secondary Volume Write Yes pairsplit
-rw
Resync Pairs none Yes pairresync
none
Delete Pairs none Yes pairsplit
-S
Monitoring commands and options
The following table shows the commands and options for viewing TC pair
information.
Operation Options
Available in
HDvM - SN
CCI
command and
options
View Pair Properties none Yes pairdisplay
-m mode
View Pair Synchronization Rate none Yes pairdisplay
-m mode
View Remote Connection Properties none Yes pairdisplay
-m mode
TC CLI reference
A-3
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models