4. In the Delete Pairs window, ensure that the pairs to be deleted appear
in the Selected Pairs table.
5. For Delete Mode, specify one of the following:
¢
Normal: Deletes the pair only if the primary system can change both
P-VOL and S-VOL to unpaired volumes.
¢
Force: Forcibly deletes pairs even when the primary system cannot
communicate with the secondary system.
6. Click Finish.
7. In the Confirm window, review the settings and enter a task name in the
Task Name box.
8. Click Apply to save your settings in the system.
TC pair operations
6-11
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models
To Next Page
Loading...
