Hitachi HA820 G2 - Page 15

Hitachi Advanced Server HA820 G2 User Guide 15
Item Description Status
1 UID button/LED
1
Solid blue = Activated
• Flashing blue:
◦ 1 Hz/cycle per sec = Remote
management or firmware upgrade in
progress
◦ 4 Hz/cycle per sec = iLO manual
reboot sequence initiated
◦ 8 Hz/cycle per sec = iLO manual
reboot sequence in progress
◦ Off = Deactivated
2 NIC status LED
1
• Solid green = Link to network
• Flashing green (1 Hz/cycle per sec) =
Network active
• Off = No network activity
3 Power On/Standby button and
system power LED
1
• Solid green = System on
• Flashing green (1 Hz/cycle per sec) =
Performing power on sequence
• Solid amber = System in standby
• Off = No power present2