Hitachi HCP Anywhere Edge User Manual

Step 6: Create the data partition
After you install the Windows Server software, you need to configure a data
partition on the HCP Anywhere edge appliance.The data partition will be
used to store any data that is added to the HCP Anywhere edge appliance.
To create the data partition:
1. If you are not already done so, log in to the HCP Anywhere edge
appliance.
2. In the bottom left corner of the screen, click the search bar icon ( ).
3. In the search bar, type: Create and format hard disk partition . In the search
results, double-click Create and format hard disk partition.
Chapter 4: Recovering the HCP Anywhere edge appliance
51
HCP Anywhere Edge Appliance On-Site Setup and Recovery
Option 2: Reinstall the operating system

Hitachi HCP Anywhere Edge Specifications

General

Brand	Hitachi
Model	HCP Anywhere Edge
Category	Server
Language	English