Hitachi IJ RX2 - Page 108

5-52 ●Communication Timing
Time interval T1 when Print format is set to "Free layout"
No. Transmission type Conditions
T1 Maximum time (ms)
Remarks
Within 24 items 25 items or more
1 Print description
The print message transfer
ACK condition is t=fixed.
60 120 *4
The print message transfer
ACK condition is t=async.
(M: Number of
communication
characters)
(M: Number of
communication
characters)
*4
*5
2 Print data recall - 30 30
3
Print data
registration
-18001800
4
Print conditions
Print specifications 20 20
5 Print format 20 50
Line count /
print format uniformity
- -
6 Format setup change 100 100
7 Free layout - 20 20
8
User pattern
character
-
M+10
(M: Number of
communication
patterns)
M+10
(M: Number of
communication
patterns)
9 Date/time setup - 5 5 *6
10 Remote operation
Error reset 15 15
Operation start,
operation stop,
deflection voltage control
100 250
● When the Print format is set to "Free layout" and Print condition transmission of "Line count/Print
format uniformity" is made, a communication error will occur.
*4 For "t=fixed" and "t=async.", see Section 5.2.1, "Setting Communication Environment ".
*5 When there is a data matrix , QR code and GS1 DataBar setting, the time is as follows:
*6 If time changes just before 3ACK transmission, ACK transmission may be delayed about 20 ms.
M
10
+110
M
10
+270
(2) When Print format is set to "Free layout"
Time T1 when there is a data matrix , QR code and GS1 DataBar setting
Barcode type Character size
T1 Maximum time (ms)
Within 24 items 25 items or more
Data matrix
5
×8
58 250
12
×16, 18×24
85 600
QR code
QR (21
×21)
300 600
QR (25
×25)
400 600
QR (29
×29)
500 700
GS1 DataBar 60 250
(N : Number of Barcode)