Hitachi IJ RX2 - Print Data

6-27 ●Excitation V adjustment
Print data
Data to be displayed
For test
Printsusingthecurrentlysetprint
descriptionandprintconditions.
Printsusingthefollowingtestconditions:
・Numberoflines :1line
・Charactersize :12
×16dots
・Inter-characterspace :1
・Characterheight :99
・Characterwidth :5
・Inkdropuse :1/3
・Printcharacterdescription :■■nn123ABC
 (nn:ExcitationVsetvalue)
Nozzle property test 2015.07.0712:45
Com=0
[Ready ]
Excitation V-ref.
Ref. ambient temperature
Automatic update
Incremental change
Print trigger source
Print data
Excitation V-ref. is printed on the print target.
［■■ｎｎ・・・・・・］
Printing starts at the press of [Start printings].
09
(0〜19)
(℃)
23
− ＋
Abort
Start
printings
Inc.
1
(1〜9)
Button input Sensor
For test Data to be displayed
c
d
Print data
Select the contents and conditions of the characters to be printed.
b
Confirm that the IJ printer is in the Standby state and press Nozzle test .
● The Nozzle property test screen is displayed. The IJ printer enters the Ready to print state.
3
Excitation V-ref.
Input the set value you want to print. (Set value is 00 to 19.)
Change the setting using or input a value by touching the number.
c
Automatic update
Select whether or not to automatically switch to the next set value after printing one setting.
d
Disable : Set value does not change.
Dec. : Set value is automatically decremented at each printing.
Inc. : Set value is automatically incremented at each printing.
At “Inc.”, the change width by which the value is automatically switched is set.
− ＋