●Communication Monitor Function 5-57
(3) Explanation of USB output function.
● When you press the USB output button, the Communication description which is displayed on screen can
be output to a USB memory.
● The Communication description which is displayed on screen can be output to a USB memory.
when "Comm. monitor"screen is displayed AND Comm. monitor is in "Halted" status.
● The Communication description is output in a Text file format.
● Explanation of file composition and file name.
・RXCLOG holder is automatically created right below the USB memory.
・The Communication description is output in the name of LOG_Serial number_YYMMDDhhmmss.txt
right below the RXCLOG holder.
USB Memory
RXCLOG \ LOG_Serial number_YYMMDDhhmmss.txt
YYMMDDhhmmss stands
for Year, Month, Date, Hour,
Minute and Second.
● Explanation of content of output.
・A Target port is output in the lead, such as "Standard" for the standard port and "Secondary" for the
expansion port.
・
Compositions of the Text file are output in the order of No., Trans, and Communication description.
(No.: 4 digit number; Trans.: "S" for sending and "R" for receiving.)
・An asterisk (*) is output in front of the error part when an error was detected.
(Example of output text file)
Standard
0001,R,05,
0002,S,06,
0003,R,02,10,31,41,42,43,44,45,10,32,31,32,33,34,35,03,
0004,S,06,
0005,R,05,
0006,S,06,
0007,R,02,10,31,41,42,43,44,45,10,32,31,32,33,34, *7F, 03,
0008,S,15,
A Target port is output.
It is an error part.
Trans. is output with "S" for sending and "R" for receiving.
No. is output in 4 digit number.
● Explanation of content of notes.
・The data is NOT output by pressing the USB output button if the Communication description does NOT
Exist.
・
The data is NOT output by pressing the USB output button when the Line monitor is in operation.
・<USB Memory Error> is displayed when the USB memory is NOT installed on the IJP.
・<USB Memory Error> is displayed when the USB memory runs out of its capacity.
・The data is overwritten if the same file name already exists in the USB memory.
・Do NOT remove the USB memory when the USB data output is in process.
To Next Page
Loading...
